Memorex MT1091 - Manual (Page 20)

– 19 –
PROBLEM SOLUTION
• Make sure the unit is plugged in.
• Unplug the unit from the electrical outlet for 60 seconds.
Then plug it in and turn it on again.
No Power
• Make sure the antenna is properly connected at the back
of the TV.
• Make sure the antenna is not broken.
• Adjust the brightness and contrast controls.
No picture
No Color
No Sound • Use the VOLUME (Up/Down) buttons to turn up the vol-
ume.
• Make sure the sound is not muted by pressing the MUTE
button.
• Make sure the show is being transmitted in color by check-
ing to see if another channel is in color.
• Adjust the color control.
Wrong Color • Adjust the color and tint controls.
Picture Too
Light/Dark
• Adjust the brightness and contrast controls.
Picture Interference • Check the antenna for shorted or broken wires.
• Reposition the antenna.
• Try another channel to make sure there is not station trouble
or local interference (such as electric motors). If possible,
minimize by adjusting the antenna.
Remote control
Doesn’t Work • Make sure batteries are inserted in the remote control.
• Make sure the remote control is aimed directly at the re-
mote sensor on the TV.
PRINTED IN MALAYSIA
1111-2742M178 G0001-1
BEFORE REQUESTING SERVICE
Before requesting service, check the following list of problems and solutions. You may be
able to solve the problem yourself.
If you are still in need of assistance,
please call customer service at
1-800-919-3647