MITSUBISHI ELECTRIC WD-65000 - Manual (Page 36)

36
Part III : Setup
V-Chip Lock Menu: V-Chip Lock
V
-Chip Lock
V-Chip Lock
(Figure 1)
The V-CHIP LOCK allows you to Block or
Allow programs based upon rating signals
sent by the broadcasting station. The TV
comes from the factory with the V-Chip lock
in the Off setting. You can turn the lock On
within the V-Chip Menu. The default
setting is TV-PG, allowing only programs
rated TV-PG or lower. You can change
the blocking level to various TV or movie
ratings, lettered categories, and by time. After
changing channels or inputs, there may be
up to a 5 second delay before the V-Chip lock
takes effect. The V-CHIP button on the re-
mote control enables you to conveniently turn
the lock on or off.
Entry to the V-CHIP LOCK
(Figures 2-3)
The first time you press the V-CHIP button on
the remote control, or select V-CHIP
LOCK from the MAIN menu, or after you
have cancelled your passcode you will see
the screen shown in figure 2. Use the
number buttons on the remote control to
input a four-digit passcode, then press EN-
TER. You can delete a character and
move back one space by pressing CANCEL.
You can exit without inputting a passcode by
pressing MENU or HOME. The next time you
press the V-CHIP button on the remote
control, or select V-CHIP LOCK from the
MAIN menu, you will see the menu screen
in figure 3.
Figure 2. V-Chip Lock passcode screen (first-time
entry)
Figure 1. V-Chip Lock Menu
Figure 3. V-Chip Lock passcode screen (re-entry)
If you forget your four-digit passcode,
see
Appendix A , page 57.
V-CHIP LOCK
To go to the menu,
enter a
new passcode.
Use the NUMBER buttons,
then press ENTER.
- - - -
V-CHIP LOCK
To go to the menu,
enter
your passcode.
Use the NUMBER buttons,
then press ENTER.
- - - -