MITSUBISHI ELECTRIC WD-65000 User Manual
Page 51
51
Part IV : Operation
System 4 Home Theater IR Control
Remote Control Functions: System 4 Home Theater IR Control
Requirements for Operation
A/V devices connected as described on page 15.
Cable Box connected as on page 16 or Cable Box with an S-Video output connected as
on page 19.
TV connected to A/V receiver (TV Monitor Audio Out To A/V Receiver TV Input).
TV Inputs Renamed:
Cable Box connected to Ant A or B
=
Cannot be Renamed
Cable Box connected to Input 1-5
=
Rename To Cable
VCR connected to Input 1-5
=
Rename To VCR
DVD connected to any Input
=
Rename To DVD
Satellite Receiver connected to any Input =
Rename To DBS
Digital Television Receiver on DTV Input
=
Cannot Be Renamed
Remote Control programmed to operate your other A/V Devices by System 4 properly
activated.
IR emitters properly connected and placed.
Operation (VCR as example)
To watch your VCR:
1
Turn on the TV and A/V Receiver.
2
Move slide switch to VCR.
3
Point remote at the TV and press the HOME THEATER button.
4
The TV and A/V Receiver should change to the appropriate inputs.
5
Operate the VCR.
Other commands from your Mitsubishi
remote control, or other manufacturer’s
remote, will be passed through the TV.
System 4 allows for only one of the
following:
• Cable Box
• Satellite Receiver
• Digital TV Receiver