MITSUBISHI ELECTRIC WD-65000 - Manual (Page 39)

39
Part III : Setup
Timer
Advanced Menu: Timer
Timer Menu
(Figure 2)
The timer can be turned On or Off. When On,
you need to select the time to turn on,
the day to turn on, and the channel to display.
At your pre-selected time, the timer
will turn the TV on, and a message will be
displayed, “Press a key for the TV to stay
on ”. Any button on the remote control must
be pressed within 5 minutes, or the TV will
turn itself off.
Set Time
Select the hour and minute, including AM or
PM, when the TV is to turn on.
Press
{
or
}
to slowly adjust the time.
Press and hold
{
or
}
to quickly adjust the
time.
TIMER
(Figure 1)
The timer will automatically turn the TV on (if it is
off) at the time you schedule and select.
Set Day
Select the days that the TV will turn on auto-
matically. You can select Everyday, Mon-Fri
(Monday through Friday), or the individual
days of the week.
Input
Select the input to use when the timer turns
on the TV. If the TV is already on, the timer
will turn the TV to this selected input.
Channel
When Ant-A or Ant-B is the selected input,
you may select any memorized channel. The
TV will tune to this channel when the timer
turns it on.
Figure 2. Timer Menu
Figure 1. Timer selection in the Advanced Menu.
The TV’s clock must be set before you
can set the timer. If you have not set
the clock and/or day, you will see the
CLOCK menu instead of the Timer
menu.