Memorex MVT2195B - Manual (Page 13)

ENGLISH
11
If you are using an indoor or outdoor antenna (outdoor antenna not included), follow the instructions below
that correspond to your antenna system. If you are using a cable TV service (CATV), see page 13 for Cable
TV connections.
Combination VHF/UHF Antenna (Separate VHF and UHF 300 ohm Twin-lead Wires)
Combination VHF/UHF Antenna (Single 75 ohm cable or 300 ohm Twin-lead Wire)
ANTENNA CONNECTIONS
75 ohm
Coaxial
Cable
300-75 ohm
Matching
Transformer
300-75 ohm
Matching
Transformer
UHF 300 ohm
VHF 300 ohm
UHF 300 ohm
VHF 75 ohm
Connect the UHF 300 ohm Twin-lead Wire to the
Combiner (not supplied). Connect the VHF 300 ohm
Twin-lead Wire to the 300-75 ohm Matching Transformer
(not supplied). Attach the Transformer to the combiner,
then attach the Combiner to the Antenna Jack.
Separate VHF/UHF Antennas (75 ohm VHF cable and 300 ohm UHF Twin-lead Wires)
Antenna
Jack
Antenna
Jack
Antenna
Jack
Combiner
Antenna
Jack
Combiner
Connect the 75 ohm cable from the combination VHF/
UHF antenna to the Antenna Jack.
If your combination VHF/UHF antenna has a 300 ohm
Twin-lead Wire, the use of the 300-75 ohm Matching
Transformer (not supplied) may be necessary.
Connect the VHF 75 ohm cable and UHF 300 ohm
Twin-lead Wire to the combiner. Attach the Combiner
to the Antenna Jack.
545A201A-E/P10-19 19*04*0, 17*13 11