Memorex MVT2195B - Manual (Page 33)

ENGLISH
31
PO
WER
SLEEP
TV MONI.
EJECT
QUICK VIEW
MUTING
INPUT SELECT
REC/O
TR
SPEED
MENU
–
+
–
+
SET/TRA
CKING
SKIP SEARCH
COUNTER
RESET
ZER
O
RETURN
AU
TO
TRA
CKING
TV/CAP/
TEXT
PR OGRAM
CANCEL
ENTER
ST
OP
PLA
Y
F.FWD
REW
TIMER REC
PA
USE/STILL
CHANNEL
CALL
1
2
3
4
5
6
7
8
0
9
–
+
VOLUME
Picture controls are factory preset but you can adjust them individually as follows:
PICTURE CONTROL ADJUSTMENTS
2 Press the SET/TRACKING + or – button to select
the PICTURE option, then press the ENTER button. 1
M E N U
TIMER REC SET
TV SET-UP
CH SET-UP
AUTO REPEAT ON OFF
SYSTEM SET-UP
〈 +/–/ENTER/MENU 〉
BRIGHTNESS CONTRAST
1 2
1
To display the picture adjustment screen, press the
MENU button.
Press the SET/TRACKING + or – button to select the
TV SET-UP option, then press the ENTER button.
Press the ENTER button until “BRIGHTNESS” appears
on the screen, then press the SET/TRACKING + or –
button to adjust the brightness of the picture. When
the SET + button is pressed, the darker portions of
the picture become lighter.
– + SET/TRACKING ENTER MENU
TV SET-UP
V-CHIP SET
ON/OFF TIMER
PICTURE
〈 +/–/ENTER/MENU 〉
BRIGHTNESS 0
〈 +/–/ENTER/CANCEL/MENU 〉
CONTRAST 32
〈 +/–/ENTER/CANCEL/MENU 〉
NOTE: The CONTRAST default
setting is set to maximum
at the factory.
– + SET/TRACKING ENTER
– + SET/TRACKING ENTER
NOTE: The On-screen display will disappear 6 seconds after finishing an adjustment or by pressing the MENU
button three times. The settings can only be adjusted when they are displayed on the TV screen.
Press the ENTER button until “CONTRAST” appears
on the screen, then press the SET/TRACKING + or –
button to adjust the contrast of the picture. Pictures look
sharpest in the daytime (bright light) by increasing the
contrast. At night (dim light), the sharpest picture is
obtained by reducing the contrast.
– + SET/TRACKING ENTER
545A201A-E/P30-39 19*04*0, 17*09 31