Mitel Navigator 3300 ICP - Manual (Page 31)

Navigator User Guide
25
Call Handling
Hold
The Navigator allows a maximum of four calls on Hold at one time.
To place a call on Hold:
1. Press (HOLD). The associated Line key flashes.
2. Hang up the handset, if desired.
To retrieve a call from Hold:
1. Lift the handset, if desired.
2. Press the associated flashing Line key.
To retrieve a call from Hold at another phone, do one of the following:
• Press the flashing line key.
• Dial
**1 and the number of the station that placed the call on Hold.
Mute
Mute lets you temporarily turn your phone’s handset, headset, or handsfree microphone off
during a call.
To turn Mute on during a call:
• Press (MUTE). The
key light turns ON.
To turn Mute off and return to the conversation:
• Press (MUTE). The
key light turns OFF.
NOTE FOR USERS ON RESILIENT 3300 ICP SYSTEMS: If your phone switches to the
secondary system while your speaker or handset is muted (that is, while the key is lit), the
call remains muted until you hang up.
Transfer
To Transfer an active call:
1. Press (TRANS/CONF).
2. Dial the number of the third party.