MAXDATA NOTEBOOK PRO 5500 IR - Manual (Page 34)

4
Fig. 17
The ExpressCard slot
The computer is provided with an ExpressCard slot. This slot is 54 mm wide and is suitable
for ExpressCard/4 and ExpressCard/54 expansion cards.
Fig. 18
The Memory Card Slot
The computer is provided with a combination slot. This slot accepts Memory Sticks, MS
Pro, SD (Secure Digital), and MMC (Multimedia card) cards.
Insert these cards into the slot holding the printed side upwards. After the card is inserted
correctly into place, it is recognized as an additional drive. The data on the card can then
be accessed.
To remove it, simply pull the card out.
Never remove the card while data is being read from or written to the card!
DO NOT use the “Safely Remove Hardware” function to remove the memory card! In this
case always restart the system to reactivate the combo slot.
To insert an ExpressCard, push it
into the slot until it locks into place.
Make the connection you require (for
example, network connection).
Also consult the documentation for
the relevant card.
To remove the ExpressCard, first
push it gently inward. This releases
the catch, allowing the ExpressCard
to be removed.
System Overview