MAXDATA NOTEBOOK PRO 5500 IR - Manual (Page 36)

6
UMTS card (optional)
You must have an appropriate contract with a mobile phone provider to use the notebook’s
UMTS functionality. You will receive a SIM card from your provider. Insert it into the note-
book as described below. You will find detailed information about UMTS software on the
Utility CD.
The SIM card must not be inserted or removed while the notebook
is switched on.
1. Remove all cable connections,
disconnect the notebook from
its power supply and remove the
battery.
. Remove the cover on the under-
side of the notebook. Remove the
eight screws with a Phillips head
screwdriver. Keep the screws in a
safe place.
. Place the UMTS module into the
slot as illustrated. Secure it with
two screws.
4. Replace the cover and screw it
firmly into place.
5. Flip up the SIM card holder.
6. Place the SIM card in the holder
as illustrated. Make sure the SIM
card contacts are oriented cor-
rectly.
7. Flip the SIM card holder back into
its original position so that it locks
audibly into place.
8. Insert the battery.
Fig. 21
Fig. 22
System Overview