Mercury INSTALLATION MANUAL D7.3L D-TRONIC - Manual (Page 57)

D7.3L D-TRONIC DIESEL ENGINES - BRAVO MODELS
Page 57 of 90
10. Shift remote control lever into full forward position. Place end of adjustment tool in barrel
retainer.
RH ROTATION BRAVO ONE, TWO, THREE AND BLACKHAWK MODEL: Rear slot in tool
should fit over shift lever stud.
LH ROTATION BRAVO ONE AND TWO: Forward slot in tool should fit over shift lever stud.
If slot does not fit over stud, loosen shift lever stud and slide stud either direction, until slot
in tool fits over stud. When adjustment is correct, retighten stud.
23242
a
b
c
d
RH Rotation Bravo One, Two, Three
23242
d
a
b
c
LH Rotation Bravo One And Two
a -
Adjustment Tool
b -
Barrel Retainer
c -
Shift Lever Stud
d -
Shift Lever Adjustment Slot
11. Remove adjustment tool.
12. Lubricate shift cable pivot points with 30W oil.