MITSUBISHI ELECTRIC PK10 - Manual (Page 7)

EN-7
11. Power-cord protection
Power-supply cord should be routed so that it is not
likely to be walked on or pinched by items placed upon
or against it. Pay particular attention to cord at plug,
convenience receptacles, and points where it exit from
the appliance. Do not put the power cord under a
carpet.
12. Overloading
Do not overload wall outlets and extension cords as
this can result in a fire or electric shock.
13. Objects and liquids
Never push objects of any kind through openings of this
projector as they may touch dangerous voltage points or
short-out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the projector, adaptor or
battery.
14. Servicing
Do not attempt to service this projector yourself. Refer
all servicing to qualified service personnel.
15. Damage requiring service
Unplug this projector from the wall outlet and refer
servicing to qualified service personnel under the
following conditions:
(a)If the power-supply cord or plug is damaged.
(b)If the adaptor or the battery is damaged.
(c)If liquid has been spilled, or objects have fallen
into the projector, adapter or battery.
(d)If the projector does not operate normally after
you follow the operating instructions. Adjust only
those controls that are covered by the operating
instructions. An improper adjustment of other
controls may result in damage and may often
require extensive work by a qualified technician
to restore the projector to its normal operation.
(e)If the projector has been exposed to rain or water.
(f )If the projector has been dropped or the cabinet
has been damaged.
(g)If the projector exhibits a distinct change in
performance- this indicates a need for service.
16. Replacement parts
When replacement parts are required, be sure that
the service technician has used replacement parts
specified by the manufacturer or parts having the
same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock or other
hazards.
17. Safety check
Upon completion of any service or repair to this
projector, ask the service technician to perform safety
checks determining that the projector is in a safe
operating condition.
18. Keep appropriate method when recharge the battery.
19. The projector is a precision instrument. Please pay
attention on static electricity.