MITSUBISHI ELECTRIC PK10 - Manual (Page 8)

EN-8
WARNING:
Unplug the power cord or remove the battery
immediately if there is something wrong with your
projector.
Do not operate if smoke, strange noise or odor comes out
of your projector, adaptor or battery. It may cause fire or
electric shock. In this case, unplug immediately and
contact your dealer.
Never remove the cabinet.
This product contains high voltage circuitry. An inadvertent
contact may result in an electric shock. Except as
specifically explained in User Manual, do not attempt to
service this product by yourself. Please contact your
dealer when you want to fix, adjust, or inspect the projector.
Do not modify the projector.
It can lead to fire or electric shock.
Do not keep using the damaged projector.
If the projector is dropped and the cabinet is damaged,
unplug the projector and contact your dealer for inspection.
It may lead to fire if you keep using the damaged projector.
Do not face the projection lens to the sun.
It can lead to fire.
Use correct voltage.
If you use incorrect voltage, it can lead to fire.
Only use the provided AC adaptor (02550-0112-00).
Do not place the projector on uneven surface.
Place the projector on a level and stable surface only.
Do not look into the lens when the projector is
operating.
It may hurt your eyes. Never let children look into the lens
when the projector is on.
Do not unplug the power cord or remove the battery
during operation.
It can lead to product failure, fire, electric shock or other
troubles.
Do not touch the air outlet grilles and bottom plate.
Do not touch them or put other equipment close to the air
outlet grilles because they become hot during operation.
The heated air outlet grilles and bottom plate may cause
injury or damage to other equipment. Also, do not put the
projector on a desk that is easily affected by heat.
Do not look into the air outlet grilles when projector is
operating.
Heat, dust, etc. may blow out of them and hurt your eyes.
Do not block the air inlet and outlet grilles.
If they are blocked, heat may be generated inside the projector,
causing deterioration in the projector quality and fire.
Don’t put upwards. Because of blocking exhausted hole.
Don’t drop.
Don’t throw it away.
Don’t project to person’s eyes.