Motorola Timeport P730 - Manual (Page 12)

43
Note: Although the task has been completed, it does not move to a
different position within the Task List. As per the example above, the
completed task remains in the third position on the list.
To mark complete other tasks, repeat Steps 4 and 5 as necessary.
Setting Reminder Alarms for Events (the Event List)
Note: You must set the reminder alarm for the event. Otherwise, the move
does not take effect and you must move the message to this folder again.
As soon as you move the message to the Event List, a screen similar to the
example below is displayed.
Note: The time and date default to the current time and date.
ΠPress s to move to the hour field.
Press x and/or w until the hour of the alarm is set.
Press s to move to first minute field.
Repeat Steps 2 and 3 until you have set the second minute, method of time
measurement, and date fields for the alarm.
Alarm indicator
r 12:00PM 05/03/00
SET EVENT TIME
Set Event Time example
FO
LD
E
R
S
44
Note: You can set a daily alarm by selecting --/--/-- in the date field.
Press t . The alarm is set and the pager returns to the Status screen.
When the event’s alarm time is reached, an alert is activated (audible only).
Press any button to stop the alarm. c is flashing.
Press u to open the Event List. The indicator has changed from C to H as
shown below. If this is a one-time only alarm, the message is automatically
moved to the Trash at midnight. Otherwise, the message remains in the
Event List until it is manually moved to another folder.
Press u again to read the message.
Note: If you move an Event List message with its reminder alarm set to
any other folder, it loses its alarm. If you move it back to the Event List,
you must reset the reminder alarm.
Event List indicator
and time and date
alarm expired
Y L
› !@:@#
" m )%/!@
[H
12:23PM 05/12 Call Mary
at
Event List Expired Alarm Message example
F
E
AT
URE
S
45
Changing the Reminder Alarm (in the Event List)
There are various reasons why you might need to reset the reminder alarm:
you still need to remind yourself about an event for which the one-time
reminder alarm has already expired (before midnight of the same day); or
maybe you need to change the alarm time. Whatever the reason, you can reset
the reminder alarm.
In the Event List, make sure the event you want is at the top of the list.
ΠPress t to display the Function menu.
Press s until
H
(SET EVENT TIME) flashes.
Press t . Reset the reminder alarm using the steps in “Setting Reminder
Alarms for Events (the Event List)” on page 43.
Battery Gauge
Located on the Status screen, the battery gauge indicator displays the battery
energy level. The five indicators range from full to low:
L (full), a (3/4), b (1/2), c (1/4), and d (l ow).
Duplicate Messages
If the same message is received more than once, DUPLICATE is displayed at the
beginning of the new message. This new message also contains the latest time
and date stamp.
F
E
AT
URE
S
46
Emergency Call
Any of the three message types (personal, maildrop, or super maildrop) can be
used to send an emergency call. The emergency message immediately displays
on the pager, regardless of the pager’s alert mode. A unique alert emits—
different from any other alert on the pager—and EMERGENCY CALL is displayed,
indicating this type of message has been transmitted. Read this message as
you would any other. Please speak with your service provider to determine if
this feature is offered.
Errored Data Indicator
If errored data is received, M flashes in the character position where the
errored data was received.
Key Click
When this feature is turned on and the pager is in audible alert mode ( Y ), a
“click” is emitted whenever a button is pressed. If the pager is in silent alert
mode (
Z ), no “click” is emitted.
Memory Capacity
The pager’s available memory depends on the following: how your service
provider has divided the memory between personal and maildrop messages
(including super maildrop messages); how much information is stored in the
various message folders; and how many previously read and unread messages
are displayed on the Status screen.
F
E
AT
URE
S