Muratec Printer/Copier/Scanner MFX-C3035 - Manual (Page 117)

[Admin Settings] 3-70
[Security Settings]
"
All factory default values are shown in bold.
Item Description
[Administrator Password] Settings [12345678]
Change the administrator password.
Specify the administrator password as a 0 to 8
digit number.
"
If password rules have been applied, an
8-digit password must be specified.
"
If the administrator password is
incorrectly entered three times, machine
operations are locked. If this occurs, turn
the machine off, then on again.
[Password] (top): Type in the current password.
[Password] (bottom): Type in the new pass-
word.
[Security Details] Specify detailed security settings to limit
machine functions. Security can be enhanced if
machine functions are limited.
[Password Rules] Settings [ON] / [OFF]
Select whether or not password rules are
applied.
[Registering and
Changing Addr.] Settings [Allow] / [Restrict]
Select whether or not to prohibit editing of the
address book. If [Restrict] is selected, the
address book cannot be edited.
[Manual Destination
Input] Settings [Allow] / [Restrict]
Select whether or not to prohibit manual input
of a destination. If [Restrict] is selected, desti-
nations for fax and scan operations cannot be
entered directly.
[Hide Personal Data] Settings [ON] / [OFF]
Select whether or not to display transmission
destinations in the job log. If [ON] is selected,
transmission destinations are not displayed.