Muratec Printer/Copier/Scanner MFX-C3035 - Manual (Page 97)

[Admin Settings] 3-50
[Paper] Specify settings for the paper used for printing.
[Default Paper] Specify settings for the paper that is normally
used.
[Paper Size] Settings [Letter] / [Legal] / [Executive] / [A4]
/ [A5] / [A6] / [B5 (JIS)] / [B6] / [Govt
Letter] / [Statement] / [Folio] / [SP
Folio] / [UK Quarto] / [Foolscap] /
[Govt Legal] / [16K] / [4×6] / [Kai 16]
/ [Kai 32] / [Env C6] / [Env DL] /
[Env Monarch] / [Env Chou#3] /
[Env Chou#4] / [B5 (ISO)] /
[Env#10] / [J Postcard] / [J Post-
card-D] / [8 1/8Ч13 1/4] / [8 1/2Ч13
1/2] / [Custom Size]
Select the paper size.
"
The default setting is [Letter] for USA
and Canada, and [A4] for other
countries.
[Custom Size] Press [Width] and [Length], and then type in
the paper size.
Setting range for Width
For inches: 3.63 to 8.50 inches
For millimeters: 92 to 216 mm
Setting range for Length
For inches: 5.83 to 14.00 inches
For millimeters: 148 to 256 mm
"
These settings can be specified if [Paper
Size] is set to [Custom Size].
[Paper Type] Settings [Plain Paper] / [Recycled] / [Thick
1] / [Thick 2] / [Label] / [Envelope] /
[Postcard] / [Letterhead] / [Glossy
1] / [Glossy 2] / [1 Side Only] / [Spe-
cial Paper]
Select the paper type.
[Measurement Unit Set-
ting] Settings [Inch] / [mm]
Select the measurement units.