Monster Power 15 Amp - Manual (Page 14)

8
Surge Module Installation
The Surge Module features patented Monster Clean Power Stage 1 v.2.0 to reduce interference coming through
the AC power line to your components and provides surge protection against damaging voltage surges and spikes.
A) Strip about a half inch of insulation off the ends of the line (Black), neutral (White), and ground (Green)
input wires extending through the two gang outlet box.
B) Attach each wire to the corresponding input wires (distinguished by solid copper wire) extending
from the Surge Module of your In-Wall PowerCenter with wire nuts.
C) Install ring terminals (not included) to each output wire (distinguished by multi-strand wire).
HOOK-UP GUIDE – STANDALONE APPLICATIONS