Hook-up guide – stand alone applications – Monster Power 15 Amp User Manual
Page 16
10
HOOK-UP GUIDE – STAND ALONE APPLICATIONS
Coaxial Connections Installation
In-Wall PowerCenter comes with a decora plate and two coaxial connections units that provide surge protection against
damaging voltage surges and spikes on incoming coax cables. If you have in-wall provisions for satellite TV, TV/cable, cable
modem, etc., you can protect them by hooking them up through the PowerCenter’s coax connections. If your system does
not have in-wall provisions for coax connections, you can install the included decora plate instead.
A) If installing the decora plate and not one of the coax connections units, attach by aligning the holes between the decora
plate and the gold-plated grounding plate, inserting 2 included silver screws, and turning each clockwise until secure.
B) If installing one of the coax connections units included in your kit, locate the incoming coax cables and connect them
to the coax connections on the backside of unit.
C) Secure the coaxial connections unit to the PowerCenter by tucking any excess wire away, aligning the holes between
the unit and the gold-plated grounding plate, inserting two included silver screws, and turning each clockwise
until fully tightened.
D) Finish the installation by attaching the decorative In-Wall PowerCenter faceplate by aligning the holes between
the faceplate and the gold-plated grounding plate, inserting the included 6 white screws, and turning each clockwise
until fully tightened.
Rear Entry of Incoming
Video Cables
OR
Side Entry of Incoming
Video Cables
Top View
OUT
IN
Decora Plate