MITSUBISHI ELECTRIC HC100 - Manual (Page 13)

EN-13
ENGLISH
COMPONENT VIDEO IN
P B /C B Y P R /C R
P B /C B
Y P R /C R
1
2
COMPONENT VIDEO IN
3
4
COMPONENT VIDEO IN
1
3
4
2
Connecting to a Video player, etc.
1. Connect one end (yellow) of the supplied audio/video
cable to the VIDEO terminal of the projector.
2. Connect one end (white and red) of the supplied audio/
video cable to the audio input terminals (L/MONO, R) of
the projector.
3. Connect the other end (yellow) of the audio/video cable to
the video output terminal of the video equipment.
4. Connect the other end (white and red) of the audio/video
cable to the audio output terminals (L, R) of the video
equipment.
• Also read the instruction manual of the equipment to be connected.
• Contact your dealer for details of connection.
When a TV tuner or VCR is connected:
When you use this projector with a TV tuner or VCR connected, no image may appear or a message of No Signal
may appear on the screen when you change the channel via any channel that is not being received. In such a
case, set the channels of the TV tuner or VCR again. To avoid such symptom, use the TV tuner or VCR with its
channel skip function (that is a function not to display channels that are not being received) enabled.
Connecting to a DVD player
To connect this projector to video equipment that has component video output terminals, such as a DVD player,
use the COMPONENT terminals.
When the video equipment is equipped with the S-
video output terminal, make the connection as
follows.
1. Connect one end of the supplied S-video cable to the S-
VIDEO terminal of the projector.
2. Connect the other end of the S-video cable to the S-video
output terminal of the video equipment.
3. Connect one end (white and red) of an audio cable to the
audio input terminals (L/MONO, R) of the projector.
4. Connect the other end (white and red) of the audio cable
to the audio output terminals (L, R) of the video equip-
ment.
• Images may not be projected correctly depending on the type of the DVD player you use.
• Though it may take some time before an image is displayed on the screen depending on the type of the input
signal, such symptom is not a malfunction.
To VIDEO
terminal
To video
output
terminal
Video player, or the like
To S-VIDEO
terminal
S-video cable
To S-video
output terminal
Video player, or the like
Component
cable (Option)
DVD player
To audio output
terminal Audio cable (Option)
To audio input terminal
To audio input
terminals
Audio/video
cable
To audio
output
terminals
To audio input
terminals
Audio cable
(Option)
To audio
output
terminals