MITSUBISHI ELECTRIC HC100 - Manual (Page 30)

EN-30
61
245
310
100
5
COMPONENT VIDEO IN
Asking for installation
To view images projected by the ceiling-
mounted projector from the front:
When the projector is installed on the ceiling, the
special ceiling mount bracket, which is separately
sold, is required. Be sure to ask a certified installa-
tion specialist for installation of the projector. Con-
tact your dealer for details.
• Mitsubishi assumes no responsibilities for any
damage caused by use of other manufacturer’s
ceiling bracket and by inadequate installation
conditions even within the warranty period.
• When installing the projector on the ceiling, set
IMAGE REVERSE in the INSTALLATION menu
to MIRROR INVERT.
• Ask your installation specialist to provide a
breaker. When you do not use the projector, be
sure to shut down the main power by the breaker.
• When the projector is installed on the ceiling,
projected images may appear darker than those
projected when the projector is installed on the
floor. This symptom is not a malfunction.
• Do not install the projector where the exhaust
vents are exposed to air emitted by an air condi-
tioning. Such installation may cause a break-
down.
• Do not install the projector near a fire alarm
because it emits hot air from its exhaust vents.
To view images projected on the translucent
screen from behind:
Be sure to ask a certified installation specialist for
installation of the projector. Contact your dealer for
details.
• To view images projected from behind the screen,
set IMAGE REVERSE in the INSTALLATION
menu to MIRROR.
Dimension Drawings (unit : mm)