MGE UPS Systems EPS 8000 - Manual (Page 12)

1.3 General Description
EPS 8000 is a family of compact, high-efficiency uninterruptible power systems. Standard power ratings for single-
module systems range from 555 to 800 kVA. EPS 8000 UPS are optimized for compatibility with non-linear
computer-type loads. Computer-aided UPS diagnostics and modular construction assures that any required service
on the UPS can be identified and completed rapidly. Remote system monitoring, remote annunciation of UPS
performance signals, and telecommunication capabilities allow total control of the UPS by the user.
The EPS 8000, SSC, battery, and all auxiliary equipment is listed for safety by Underwriter’s Laboratories, Inc. (UL)
under UL Standard 1778 and under Canadian Standards Association (CSA) standard C22.107.
Major components of the EPS 8000 Single Module include:
◗ UPS Single Module
◗ UPS maintenance bypass cabinet
◗ UPS bypass cabinet
◗ Battery disconnect
Each of these cabinets is described below. Figure 1-1 shows a single-module UPS.
Figure 1-1: EPS 8000 System, S-M Configuration, 1 GCC per Module.
Introduction
EPS 8000 UPS Single Module
page 1 — 2