MGE UPS Systems EPS 8000 - Manual (Page 26)

Operation
EPS 8000 UPS Single Module
page 2 —2
2.2 Settings Selection Screen
The settings selection screens allow the user to configure the display language and set the contrast of the LCD display.
To access the settings selection screen, press the settings pushbutton, and follow the steps. See Figure 2-2.
Figure 2-2: Settings Selection Display Screen.
IMPORTANT: Select ENGLISH U.S. as the display language to match the
displays as presented in this manual.
2.3 Alarms
In the event of an alarm condition, the general status screen shows an alarm message. To determine the specific
condition causing the alarm, press the alarm key on the front panel and follow the sequential steps.
If there is a flashing exclamation mark (!) in the displayed message, there is additional information to be viewed, follow
the steps as indicated in Figure 2-3.
Most alarm messages are self-explanatory. See section 3.5 LCD Messages for a listing of the most common alarm
messages.
LANGUAGE = ENGLISH U.S.
≥=SELECT *=CONFIRM.
general status screen
DISPLAY CONTRAST
≥=SELECT *=CONFIRM.
°
ø
°
Press the settings pushbutton to access the
language selection menu.
Select the display language: French, English
(U.K.), Spanish, Dutch, Italian, Swedish,
Portugese, English (U.S.), German, or Finnish
Press the ° pushbutton to confirm the language
selection and access the contrast selection menu.
Set the display contrast by pressing the ≥
pushbutton until the desired contrast is reached.
Press the ° pushbutton to confirm the contrast
selection and return to the general status screen.