Maxtor pmn User Manual
Page 17
3. CAMERA SETUP
5. Operation
1
2
COLOR SETUP : Adjust Camera Image
TITLE SETUP : Input TITLE of each camera
CH NUMBER
BRIGHTNESS
CONTRAST
SATURATION
HUE
GAIN
(-31~ +32)
(-31~ +32)
(-20~ +32)
(-31~ +32)
(-31~ +32)
: Select camera
: Adjust screen brightness
: Adjust color contrast
: Adjust color saturation
: Adjust color hue
: Adjust image signal level
1) Use [LEFT] or [RIGHT] button to select CHANNEL and
press [ENTER] button.
2) Go to channel you want to change using [LEFT] or [RIGHT]
button. Then change title of selected channel using
[UP] or [DOWN] button.
17
CAMERA SETUP
COLOR SETUP
TITLE SETUP
ACTIVE CH SETUP
SCREEN POSITION SETUP
COLOR BAR TEST
SELECT , PRESS
1
2
3
4
CAMERA SETUP
5
CAMERA COLOR SETUP
CH NUMBER
BRIGHTNESS
CONTRAST
SATURATION
HUE
GAIN
SELECT , PRESS
CAMERA COLOR SETUP
1
+2
- 2
- 8
+0
+0
When modification is finished, press [MENU] button to
come back to the MAIN MENU.
5. Operation
6. MARK IMAGE (Internal backup) SETUP
5. Display Enlargement.
2) Press [ZOOM] button, during Playback or PAUSE mode.
3) The display will enlarge by 200%
4) Use [up], [down], [left] AND [right] buttons to move the area
enlarged.
5) Press [ZOOM] button again to go back to Playback or FRZ
mode.
NOTICE : Execute when it is in FULL SCREEN of each
channel.
1) Choose camera by pressing numbers button.
When [SPEED] button is pressed, ZOOM does not
work.
4. Playback Speed Setup
1) During playback , press [SPEED] button.
2) Display screen as on the right will appear.
3) Use [LEFT] or [RIGHT] button to move forward (FF) or
4) Use [UP] or [DOWN] button to select the speed rate.
(High speed up to x60 and slow speed up to 1field/60sec is
is available.)
During Playback, press [MARK] button and choose pictures you want to store separately using [LEFT] and
[RIGHT] button. Pictures you marked shall be protected from being overwritten.
14
2002/APR/12 AM 07:40:38
1X PLAY SPEED
CAM1
CAM2
CAM3
CAM4
We recommend you to install 7200rpm EIDE hard disk drive.
5400rpm EIDE hard disk drive is not good enough to retrieve
ZOOM
Press(X2 Enlargement)
Press
Chosen
1X PLAY SPEED
2X PLAY SPEED
4X PLAY SPEED
8X PLAY SPEED
16X PLAY SPEED
32X PLAY SPEED
60X PLAY SPEED
Chosen
1X PLAY SPEED
1/2 PLAYSPEED
1/4 PLAYSPEED
1/8 PLAYSPEED
1/16 PLAYSPEED
1/32 PLAYSPEED
1/60 PLAYSPEED
Playback speed
PLAYBACK SPEED SETUP
backward (REW).
ALL ABOUT IMAGE RECOGNITION & PROCESSING
ALL ABOUT IMAGE RECOGNITION & PROCESSING
recorded data in high speed playback mode.
CAMERA TITLE SETUP
CAMERA TITLE SETUP
SELECT , PRESS ENTER
0 1 2 3 4 5 6 7 8 9 . , < > ( ) - = A B C D
E F G H I J K L M N O P Q R S T U V W X Y Z
a b
c d e f g h I j k l m n o p q r s t u v w x y z
CH1
CH2
CH3
CH4
(CAM 1 )
(CAM 2 )
(CAM 3 )
(CAM 4 )
Right adjustment of each element in COLOR setup will increase picture quality displayed.
We recommend you to adjust each element of COLOR SETUP for cameras and monitor to be connected
to the DVMR unit for better appearance.
MARK IMAGE FUNCTION is very unique and useful function, because it enables you to store pictures you
selected in playback mode separately and protect those pictures from being erased even though HDD is in the
process of being overwritten.
For detail, refer to MARK IMAGE SETUP/MISCELLANEOUS SETUP in page 28.