Maxtor pmn - Manual (Page 5)

2. Before reading this document
1. This document is intended for both the administrator and users of stand alone DVMR Model.
2. This manual contains information for configuring, managing and using stand alone DVMR Model.
3. To prevent fire or electrical shock, do not expose the product to heat or moisture
4. Be sure to read this manual before using stand alone DVMR Model.
5. For questions and technical assistance of this product, contact your local dealer.
1. About this document
2
Before installing stand alone DVMR, be sure to thoroughly review and follow the instructions in this
User s Manual. Pay particular attention to the parts that are marked NOTICE.
Also, when connecting with external application, first turn the power OFF and follow manual
instruction for appropriate installation.
ALL ABOUT IMAGE RECOGNITION & PROCESSING ALL ABOUT IMAGE RECOGNITION & PROCESSING
Strong recommendation on installation of the DVMR unit
1. Check electricity at the place you want to install the DVMR unit is stable and meets our
electricity requirements.
Unstable electricity will cause malfunction of the unit or give critical damage to the unit.
2. Several chips on the main board of the DVMR unit and hard disk drive inside the unit generate
heat, and it must be properly discharged.
Do not put any objects just beside exhaust port(fan) on the left side of the unit and do not close
up an opening (fresh air in-take) on the right side of the unit..
3. Put the DVMR unit at well-ventilated place and do not put heat-generating objects on the unit.
When it is installed inside 19 inch mounting rack together with other devices, please check built-
in ventilation fan of the rack is properly running.
6. Specification and
configuration
29
1. SPECIFICATIONS
INPUT
OUTPUT
S/N RATIO
HORIZONTAL RESOLUTION
COLOR
ZOOM
PIP
SEQUENCE
SCREEN QUALITY
SPEED
SIMPLEX/DUPLEX
PICTURE RECORDING
METHOD
REC, MODE
TRACK PLAY
SPLIT SCREEN
WEB INTERFACE
POST ALARM FUNCTION
BACK-UP
OTHERS
CAMERA CONTROL
CONFIGURATION
2 HDD
4 CH INPUT 1.0 VP-P, 75 OHM UNBALANCED (BNC TYPE)
3 OUTPUT VBS : 1.0VP~P.75 OHM UNBALANCED (BNC TYPE)
MORE THAN 4dB
480TV LINES
16.7 MILLION
LIVE & PB AVAILABLE
AVAILABLE
AVAILABLE
FULL : 720(H)X480(V) ACTIVE PIXELS
1/4 SCREEN : 360(H)X240(V) ACTIVE PIXELS
0.1~30 FRAME/SEC (EACH CHANNEL)
JPEG
DUPLEX(PLAYBACK/RECORDING)
QUAD SCREEN RECORDING
FIELD SWITCHER METHOD FULL SCREEN RECORDING
REAL-TIME/ TIME-LAPSE / EVENT
SEARCH, STILL
FULL, QUAD DISPLAY
Stand alone DVMR
TCP/IP with client software
1~59SEC, CONTINUOUS TIMING ESTABLISHMENT POSSIBILITY
CONVENTIONAL VCR, TIME LAPS VCR (VCR OUTPUT PROVIDED)
REMOTE BACK-UP USING TCP/IP
INTERNAL BACK-UP(MARK IMAGE)
RS232C, RS485, MAX 4 ALARM INPUT
PAN/TILT/ZOOM AND FOCUS
REMOTE CONTROL : EXTERNAL EQUIPMENT, WIPER,PUMP,FAN AND
HEATER
PLUG&PLAY
INTERNAL 1 OR 2 HDD
ACCEPT MIXED USAGE OF HDD FROM DIFFERENT MANUFACTURERS
VIDEO I/F
MONITORING
METHOD
RECORDING
/PLAY
FUNCTION
OTHER
FUNCTION
MODEL NO
OPERATION TEMPERATURE
OPERATION HUMIDITY
IR REMOTE CONTROLLER
DIMENSION
WEIGHT
POWER SUPPLY
41F~ 104F (5C~ +40C)
LESS THAN 90%
BUILT-IN
13 INCHES IN WIDTH 445 mm x 415 mm x 130 mm
APPROX. 5KG (HDD 1EA)
DC ADAPTER (12V DC 4.5A)
MECHANICAL
Input 4CH INPUT 1.7VP-P, 47K OHM UNBALANCED (MONO PHONE JACK)
AUDIO
Output 1 OUTPUT, 3.4VP-P, 600 OHM UNBALANCED (MONO PHONE JACK)