Motorola Canopy Powerline MU - Manual (Page 39)

Powerline MU
Page 39 of 112
Use the Date and Time screen to set the current date and time on the Gateway (use 24-
hour time format). You can also set the date and time by entering the Network Time
Protocol (NTP) server and selecting Enable.
Select Apply.
6.2.3 System Password Configuration
The factory default user ID for the Gateway is admin and the factory default password is
Motorola. You should change the user ID and password as soon as you log in the first
time.
Use the System Password screen to change the user ID and password for this Gateway.
The user ID and password are case sensitive.
Figure 18 System Password Configuration Screen
Change the user ID and password to enhance security in the Gateway and select Apply.
Determine the auto-logout time (in seconds) and select Apply.