Motorola Canopy Powerline MU - Manual (Page 70)

Powerline MU
Page 70 of 112
7.3.10 Advanced SNMP Access Control
Figure 47 SNMP Access Control Screen
Use this screen to control which IP addresses and networks are allowed to SNMP
manage the Modem. Enter the Access Network Address and Mask and select Apply.
7.3.11 Operating Mode (Modem Repeater Function)
Figure 48 IP Operating Mode (Normal)
The “Operating Mode” option allows any Powerline MU Modem to behave as a Repeater
for another Powerline Modem. By turning the first Modem into a Repeater, you can now
connect up to four other Modems through the first Modem (see Figure 49) . The Modem
Repeater is for use in a single residence or office, not for the whole building.
Requirements:
•
Modem 2 can not connect to the Gateway.
•
In Modem 2, “Powerline Scan Devices” shows the MAC address of Modem 1 with a
good Link Speed (> 20 Mbps).