Motorola Canopy Powerline MU - Manual (Page 58)

Powerline MU
Page 58 of 112
7 Powerline Modem
Install the Powerline Modem according to the directions included in the package.
Remember that the Gateway NEK and Modems NEK must match.
7.1 CONNECT TO THE MODEM
To connect to the modem, use a PC or laptop with a working Ethernet port and a web
browser.
Set a static IP address on your laptop to 192.168.1.97. You may have to temporarily
disable anti-virus software on your computer.
Using a standard CAT-5 Ethernet cable, connect your PC or laptop to the Ethernet port
on the modem.
Figure 37 Modem Connected to Laptop
Open your web browser and enter the following address:
http://192.168.1.98.
Enter your user ID and password.
Factory-installed defaults:
User ID: admin
Password: Motorola
When you first log in to the Modem, the first page displayed will be the System Info
screen.
7.1.1 User Interface Navigation tips
The user interface is divided into four main categories: