Operational parameters, Default table, Operational parameters -2 default table -2 – Motorola SYMBOL MINISCAN MSXX04 User Manual

Page 108

Advertising

10 - 2 Symbol MiniScan MSXX04 Series Integration Guide

Operational Parameters

MiniScan scanners are shipped with the default settings shown in

Table 10-1 on page 10-2

. These default values

are stored in non-volatile memory and are preserved even when the scanner is powered down.

There are two ways to change the default values:

•

Scan the appropriate bar codes in this chapter. These new values replace the standard default values in
memory. To recall the default parameter values, scan the

Set All Defaults

bar code on

page 10-8

•

Download data through the scanner’s serial port using Symbol’s Simple Serial Interface (SSI). Hexadecimal
parameter numbers are shown in this chapter below the parameter title, and options are shown in
parenthesis beneath the accompanying bar codes. See the Simple Serial Interface (SSI) Programmer’s
Guide for detailed instructions for changing parameters using this method.

Default Table

Table 10-1

lists the defaults for all parameters, and the page number each parameter appears on. To change any

option, scan the appropriate bar code(s).

Table 10-1

Default Table

Parameter

Number

Default

Page

Number

Set Default Parameter