Memorex MC1003 - Manual (Page 16)

15
OPERATION (CONTINUED)
TO SET OR RESET THE ALARM TIME
Please note that the alarm will be a beeping sound for 30 seconds. The alarm
cannot be set to turn on to the radio.
Press the MODE button ❶ once; the alarm time will blink in the display. Press the
SET button ❷ repeatedly to turn on the Alarm, Beep and/or Snooze features as
follows (see below for description of features):
Press SET button ❷ once to activate the alarm.
Press SET button ❷ twice to activate the alarm and beep feature.
Press SET button ❷ three times to activate the alarm, beep and snooze features.
Press SET button ❷ four times to activate the beep feature only.
Press SET button ❷ five times to activate the alarm and snooze feature.
Press SET button ❷ six times to turn all features off.
Press the MODE button ❶ three times to confirm setting.
3
Press the MODE button ❶ twice; the
alarm time hour will blink. Repeatedly
press the SET button ❷ to set the
alarm hour, then press the MODE
button ❶ to confirm; the alarm minute
will appear in the display.
1
Repeatedly press the SET button ❶ to
set the alarm minute, then press the
MODE button ❷ to confirm and exit.
2
DESCRIPTION OF FEATURES (ALARM, BEEP AND SNOOZE)
ALARM: When the alarm is activated (Alarm indicators will appear), the alarm will
sound for 30 seconds then turn off when the alarm time matches the current time.
BEEP: When the beep is activated (Beep indicator will appear), a beep will be
heard every hour (i.e. 1:00, 9:00, etc.).
SNOOZE: When the snooze is activated (Snooze indicator will appear), the alarm
will turn off for eight minutes and then turn on again. See next page for detailed
description of the Snooze feature.
MC1003.QXD 3/3/03 9:56 AM Page 15