Memorex MC1003 - Manual (Page 17)

16
IMPORTANT SAFETY INSTRUCTIONS
Activate the Snooze feature as
described on the previous page. When
the alarm sounds, press the SET
button within 30 seconds; the alarm
will turn off for eight minutes and then
turn on again. If the SET button is not
pressed within 30 seconds, the alarm
will just turn off.
1
To cancel the Snooze feature, press
the MODE button
❶ once, then the
SET button ❷ repeatedly until the
indicators disappear from the display.
2
TO USE THE SNOOZE FEATURE
To turn off the alarm while it is sounding,
press the SET button. The alarm will
stop and be set for the next day.
1
TO SHUT OFF THE ALARM
Press the SET button once while in the
actual time mode to check the alarm
time, twice to check the date and three
times to check the seconds. While
checking the alarm or date, the unit will
revert back to the actual time mode after
three seconds. When checking the
seconds, you must press the SET button
again to return to the actual time.
1
CHECKING TIMES/DATE
MC1003.QXD 3/3/03 9:56 AM Page 16