Philips Magnavox MC132EMG/17 - Manual (Page 17)

Setting the Clock (cont’d) 17
• If the TV/VCR sets the time incor-
rectly, it may have taken the time
from a PBS station in a different
time zone. Follow the steps for
Manual Clock Setting on pages
18-19.
• If no channel numbers appear
during the channel search at step
3, there are no stations in your
area that contain the time signal.
Use Manual Clock Setting on
pages 18-19.
• During the channel search at step
3, the TV picture may be distorted.
This is normal.
• To stop the channel search during
step 3, press the MENU button.
Helpful Hints
TIME SEARCH MUTE RECORD
SPEED RESET
0
8 9 7
5 6 4
2 3 1
PAUSE/STILL
+100
STOP
F.FWD
PLAY
REW
VOL.
DISPLAY
MENU
POWER SLEEP/WAKE UP
CH.
ALT.CH
The TV/VCR will scan all your available TV channels.
Those that carry a time signal will be listed at the top
of the screen. Use one of these channels when you
enter your AUTO CLOCK CH at step 6. It will take
the TV/VCR several minutes to scan the channels. An
“_ _” appears in the lower left corner of the screen
when the search is complete.
4 Press MENU to remove the menu.
5 Press MENU. Press PLAY/▲ or STOP/▼ to
select SETTING CLOCK, then press
F.FWD/B.
6 Press PLAY/▲ or STOP/▼ to select AUTO
CLOCK CH. Press F.FWD/B or REW/s until
the channel number of your local PBS station
appears.
Use a channel number you found at step 3.
7 Press MENU to remove the menu.
8 Press POWER to turn off the TV/VCR. The
TV/VCR will search for the time only when the
power is off. Leave it off for several minutes to give
the TV/VCR time to set the clock.
8
4,5,7
5-6
-AUTO CLOCK CH SEARCH-
08 10 13
_ _
– SETTING CLOCK –
AUTO CLOCK [ON]
AUTO CLOCK CH SEARCH
B AUTO CLOCK CH [ 02 ]
MANUAL CLOCK SET
D.S.T.
[OFF]