Philips Magnavox MC132EMG/17 - Manual (Page 38)

38 Automatic Operation Features
Automatic Playback
When you put a tape in the TV/VCR, the power will come
on automatically. If the tape’s record tab is missing, playback
will begin. If a timer recording is set, the power will not
come on automatically when you insert a tape with the
record tab intact. If a timer recording is set and the TV/VCR
power is off, the TV/VCR will eject the tape if the record tab
is missing.
Automatic Rewind, Eject, Off
When you play, fast forward, or record a tape to its end, the
TV/VCR will rewind the tape, stop, turn itself off, and eject
the tape.
Tape Eject
A tape can be ejected with the TV/VCR power on or off
(but the TV/VCR must be plugged in). If a timer recording is
programmed, a tape cannot be ejected when the power is
off. In this case, turn on the TV/VCR power, then eject the
tape. Be sure to insert a tape and turn off the TV/VCR
power for the timer recording.
Automatic Tracking Adjustment
The TV/VCR automatically adjusts the tracking to give you
the best possible picture quality.With some recordings, you
may get a better picture using manual tracking.
Manual Tracking
To adjust the tracking manually, press the CHANNEL ▲/▼
buttons on the TV/VCR or the CH(annel) ▲/▼ button on
the remote control during playback.
Tracking returns to Automatic Tracking Adjustment when
you insert a tape or press STOP/▼.
Before
Tracking
Adjustment
After
Tracking
Adjustment