Mark Levinson N40 - Manual (Page 145)

A-1
Specifications
Audio Processor
Connectors
6 S/PDIF electrical on RCA inputs
1 S/PDIF electrical on BNC input
2 AES/EBU electrical on XLR inputs
4 EIAJ optical inputs
1 balanced stereo pair on XLR input
6 single-ended stereo pairs on RCA inputs
6 single-ended multichannel analog on RCA inputs (optional)
8 balanced on XLR outputs
8 single-ended on RCA outputs
2 remote zone audio outputs (each include 1 single-ended stereo
RCA output and 1 S/PDIF RCA output)
1 Nº40 comm and aux comm on RJ-11 connectors
Video Processor
Connectors
3 component on three 75Ω BNC inputs
6 S-video on Y/C inputs
3 composite on RCA inputs
1 component on four 75Ω BNC outputs
1 S-Video on Y/C output
1 composite on RCA output
1 composite on RCA monitor output
2 remote zone video outputs (each include 1 S-Video and 1 compos-
ite RCA output, IR trigger output)
1 Nº40 comm on RJ-11 connector
2 PHASTlink control ports on RJ-45 connectors
2 RS-232 ports on RJ-11 connectors
3 programmable DC triggers on 3.5mm outputs
1 Main Street Communications Card (optional) includes amp
comm, slave in, master/slave out on RJ connectors
Audio Frequency
Response
20Hz – 40kHz, +0.5dB, –1.1dB
THD + N < 0.005%
Noise < -98dB below output, 20 Hz-20kHz
Crosstalk: < -100dB
Analog to Digital
Converter Type
24/96 multibit
Σ∆
Appendix