Mark Levinson N40 - Manual (Page 47)

3-3
Nº40 Media Console Rear Panel Operation
Figure 3-2: Composite Input Card. We suggest using high quality 75Ω video cables for all your video
connections.
Connect any composite video outputs that you plan to use from
your video components to these composite video inputs on the
Nº40. Keep track of which source components are plugged into
which connectors on the rear panel of the Nº40, either by keeping a
simple list (for example, “VHS – Slot 1, Connector 1”) or by making
a note on the Hookup Chart at the end of this manual.
See “The Define Input Menu” on page 5-31 for more information
on defining your inputs.)
Video Input
Expansion
This slot is electrically identical to slot 1, but is left blank in the
standard configuration. If you require additional composite,
S-video, or component inputs, the appropriate card can be added
here by your authorized Mark Levinson dealer.
S-Video Inputs Slots 3 and 4 can each handle as many as three analog video inputs
(either composite or S-video), and are normally populated with S-
video input cards. Each card contains three S-video inputs.
Figure 3-3: S-Video Input Card. Connect any S-video outputs that you plan to use from your video
components to these S-video inputs on the Nº40. Keep track of
which source components are plugged into which connectors on
the rear panel of the Nº40, either by keeping a simple list (for
example, “S-VHS – Slot 3, Connector 2”) or by making a note on
the Hookup Chart at the end of this manual.
See “The Define Input Menu” on page 5-31 for more information
on defining your inputs.
Component Inputs Slots 5, 6 and 7 can each handle one analog video input, and are
normally populated with Component Input Cards. Each card
contains one three-connector component input.
video input
1
2
3
composite video
video input
1
2
3
S video