Miele DG 2351 - Manual (Page 68)

Installing the appliance
^ Before installing the appliance secure
wood trim (supplied) h to the left
hand side of the recess using the two
3 x 20 mm screws g supplied (see
illustration).
Dimension x is:
30 ± 5 mm for a recess height of
350 mm
40 ± 5 mm for a recess height of
360 mm.
^ Push the appliance into the recess.
After aligning the appliance it must
be secured against slippage. Do this
by screwing the two wood screws i
3.5 x 25 mm (supplied) into the
vertical strip on the right hand side
and the two wood screws j 3.0 x 20
mm (supplied) into the vertical strip
on the left hand side (see illustration).
Please note that you will need to
mark and pre-drill the two left hand
fixing holes (C 2.0 mm) in the wood
trim before securing the appliance.
Installation
68