Auto white balance software, Frame rate control, See chapter “frame – Micron Technology USB Camera User Manual
Page 44: Rate control, Use the dropdown, See chapter “frame rate control, Decrease
Camera Device Settings: Auto White Balance Software
40
SMX-M8xx Series USB2.0 Camera User Guide
Auto White Balance Software
Checked Auto White Balance Software performs White Balance (Soft) automatically
every time when you move the Brightness, Contrast and Gamma sliders of the Image
Corrections tab.
Note:
Auto White Balance Software is disabled when running the SMX-M81M Camera
Frame Rate Control
The speed of the camera is measured in fps (frames per second). The value means the
number of frames (images) given by the camera per second. In the SMX-M8X Camera
Software the option of controlling the current number of frames per second is called
Frame Rate Control.
You can see the frame rate value in the right corner of the status bar in the main window
of the SMX-M8X Camera Application.
To open the Frame Rate Control window, click the Frame Rate… button in the Device
Settings window. The Frame Rate Control window will open (
Figure 7-3 Frame Rate Control window
The Set Default button sets the default value of frame rate for the camera with current
settings. The default value is flashed in every camera and is applying automatically
when the camera's settings are changed.
Note:
It is recommended to use the default value of frame rate as the most suitable for the Snapshot Loop mode
The Set Maximum button sets the maximal possible value of frame rate for the camera
with current settings.
To change the Frame Rate value manually, do the following:
1.
Open the Frame Rate Control window
2.
In the Frame Rate field enter the value you need
3.
Click Set
The current frame rate value should change according to the one you entered in the
Frame Rate Control window. Check it when running video: the frame rate value will be
displayed in the right corner of the status bar of the main application window.
Note:
The real frame rate value may vary in the range of 2-3 steps and even lower if you use a low-speed computer
To restore the maximal or default value of frame rate, do the following: