Memorex MPD8300 - Manual (Page 17)

16
CD OPERATION (CONTINUED)
While in the Stop mode, press the
MODE button. “000: (track number) will
blink and “P-001” (program number) will
appear in the display.
1
TO PROGRAM THE MEMORY (UP TO 32 TRACKS)
Programming is the ability to preselect the order in which a series of tracks will be
played.
Select a track to be programmed using the
Skip/Search (
) ❶ or ( ) ❷ button.
2
1
2
Press the MODE button to memorize
the track. Repeat steps 2 and 3 to
program additional tracks up to a
maximum of 32 tracks.
3
Press the Play/Pause ( ) /Power On
button to begin program playback.
4
NOTES:
•
To clear the program memory, press the MODE button while in the Stop
mode, then press the Stop (
■) /Power Off button.
SEE TOP OF NEXT PAGE FOR MORE NOTES ON PROGRAMMING
THE MEMORY.
MPD8300.OM 8/12/03 9:32 AM Page 16