Memorex MPD8300 User Manual

Page 6

Advertising
background image

5

This CD player requires either two (2) “AA” cell standard or rechargeable
batteries (not included) or an AC adapter (not included).

BATTERY INSTALLATION:
The battery indicator (

) will light in the display

when batteries are low and need replacing.

1. Open the battery compartment door on the

bottom of the unit by sliding it out and then
lifting it. To prevent the possibility of losing
the cover, it cannot be removed.

2. Insert two (2) “AA” cell batteries (not included)

according to the polarity diagram inside the
battery compartment. Alkaline batteries are recommended for the
longest playing time.

AC OPERATION:

To operate the unit using AC power, connect an AC adapter (not included) to
an AC outlet having 120V, 50/60Hz AC only. Plug the small end into the DC
4.5V jack on the rear of the unit and connect the other end into the AC outlet.
The batteries are automatically disconnected when the AC adapter is used.
CAUTION: When not using AC power, disconnect the AC adapter from the
wall outlet by pulling the plug (not the cord). Do not touch the AC adapter with
wet hands. Fully insert the plug without exposing any part of the blade.

DC 4.5V

+

POWER SOURCES

BATTERY PRECAUTIONS

Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated next to

the battery compartment. Reversed batteries may cause damage to the device.

3. Do not mix different types of batteries together (e.g. Alkaline, Rechargeable and

Carbon-zinc) or old batteries with fresh ones.

4. If the device is not to be used for a long period of time, remove the batteries to

prevent damage or injury from possible battery leakage.

5. Do not try to recharge batteries not intended to be recharged; they can overheat and

rupture. (Follow battery manufacturer’s directions.)

+

+ –

+

+

MPD8300.OM 8/12/03 9:32 AM Page 5

Advertising