Meyer Sound Self-Powered Studio Monitor HM-1S - Manual (Page 6)

6
HM-1S Speaker Cable
The following drawings and procedures are provided as
an aid in the event that the speaker cable used to connect
the HM-1S to the HM-1S Subwoofer needs to be repaired
or extended. In cases where the original speaker cable
has been modified, be sure to complete the Subwoofer
Performance Verification section on page 10 of this
manual. Misalignment of the polarity between the HM-1S
and the HM-1S Subwoofer will result in a serious degra-
dation of performance.
(Single HM-1S to HM-1S) Stereo Subwoofer Cable
-
+
WHITE
GRAY
Connections:
pin 1 no connection,
pin 2 no connection.
White wire to pin 3.
Connections:
Gray wire to pin 1,
pin 2 no connection,
pin 3 no connection.
Connections:
Gray wire to pin 1,
pin 2 no connection,
White wire to pin 3.
(2 HM-1S to 1 HM-1S) Mono Subwoofer Cable
M.S.P.N. 28.062.007.01
M.S.P.N. 28.062.009.01