Replacing hard drives – Maxxsonics High Definition Video Server MAXX-2400HD User Manual
Page 101
Advertising
MAXX-2400HD Owner’s Manual
Page 101
Replacing Hard Drives
Maxx 2400HD Hard Drives are hot-swappable, meaning they can be replaced “on-the-fly”
without loss of data or interruption of server operation.
To replace a drive:
A. Loosen the knurled screws fastening the front panel. Pull forward and down to expose the
drive.
B. Remove the drive by pulling on the blue lever to unlatch the drive. Refer to Figure 45.
Remove the drive from the tray and replace it with the replacement drive.
C. With the blue latch still extended, gently slide the tray into the bay until you feel it “seat”.
Press on the latch to lock the drive into place. Return the panel to its normal position.
Figure 45 - Front Panel Opened – Disk Unlatched
Advertising