Maxxsonics High Definition Video Server MAXX-2400HD - Manual (Page 27)

MAXX-2400HD Owner’s Manual Page 27
Audio Module Connections
The AXP-3, AXP-4 and DXP-1 multi-channel audio modules provide for connection of audio
equipment. Each is a 2-rack space module. Connection is made to the rear panel of MAXX-
2400HD using a 68 pin cable. Figure 3 indicates the audio module’s connectors and their
functions.
CAUTION!
Do not plug an audio module into the CXP connection. Damage to the system may occur. The
audio connector on the MAXX-2400HD is clearly marked. Connect according to Figure 3. Be
certain it is properly connected before applying power.
Connect Audio Module Here
Figure 3 – Audio Module Connection to MAXX-2400HD
Control Module (CXP) Connections
The CXP Module provides connections to the server’s serial ports and its GPI interface using a
68 pin cable. Connect it between the back of the CXP module and the CXP port on the back of the
server. Note that there are two cables supplied for initial connection.
CAUTION!!
Do not plug the CXP Module into the AXP audio module connection on the server. Damage to the
system may occur. The CXP connector on the MAXX-2400HD is clearly marked. Connect the CXP
module per Figure 4. Be certain it is properly connected before applying power.