Motorola CP040 - Manual (Page 6)

4 English
RADIO
O
V
E
R
V
IE
W
LED Indicator
The LED shows radio status as follows:
Programmable Buttons
Your radio has two programmable buttons. Your
dealer can program these buttons as shortcuts to
various radio features.
Check with your dealer for a complete list of
functions your radio supports.
The buttons can access up to two features,
depending on the type of button press:
• short press —quickly pressing and releasing the
programmable buttons
• long press —pressing and holding the
programmable buttons for a period of time (at
least 1 1/2 seconds)
• hold down —pressing and holding down the
programmable buttons while checking status or
making adjustments
The following table is a summary of programmable
radio features and corresponding page references.
In the “Button” column, have your dealer record the
name of the programmable button next to the
feature that has been programmed to it.
Also, where appropriate, have your dealer indicate
whether the button press requires a short press, a
long press, or needs to be held down.
LED State Indication
Radio Call
Red Solid Radio transmitting.
Red Flashing Channel busy - when
receiving.
Scan
Green Flashing Radio is scanning.
Call Alert
Yellow Flashing Receiving a Call Alert
Selective Call
Yellow Flashing Receiving a Selective Call
Sticky Monitor/Open Squelch
Yellow Solid Radio in monitor mode.
Low Battery Level
Red Flashing Flashing when
transmitting.
CP040_EN.fm Page 4 Thursday, October 2, 2003 10:53 AM