Minolta PI4700E - Manual (Page 192)

Print options 6
Pi4700e 6-37
P
rin
te
r D
riv
er
fo
r M
a
cin
to
s
h
Cha
p
ter 6
Finishing Settings
The Finishing Settings property sheet allows you to set finishing capa-
bilities, including sort, staple, punch, and folding, for those occasions
when you need to make multiple complete sets of the original document.
(1) OutputBins <only when Mailbin Finisher is mounted>
Select the machine exit tray into which the prints are to be fed.
Available options are limited by the type of finishing option configured with the ma-
chine.
Setting range: Auto, Bin1 to Bin5
(2) Staple <only when Multi-staple Finisher, Single-staple Finisher, Mailbin Finisher or
Folding finisher is mounted>
Select whether to staple each copy set of the document.
• Off Does not staple the printed pages.
• Corner Staples together each copy set at its corner.
• Short Edge <only when Multi-staple Finisher or Folding Finisher is
mounted> Stapled along the short edge of the docu-
ment.
• Long Edge <only when Multi-staple Finisher or Folding Finisher is
mounted> Stapled along the long edge of the docu-
ment.
• Center <only when Folding Finisher is mounted> Stapled at
the center of the document.
(3) Punch <only when Multi-staple Finisher, Mailbin Finisher or Folding Finisher is
mounted>
Select whether to punch holes in the printed pages.
• Off Does not punch holes.
• Short Edge Punches holes along the short edge of the document.
• Long Edge Punches holes along the long edge of the document.
(4) Folding <only when Folding Finisher is mounted>
Set the folding functions for finishing.
• Off Does not fold the printed page.
• Crease Makes a crease in the printed page.
(1)
(2)
(3)
(4)