Minolta PI4700E - Manual (Page 69)

3 IPP Printing
3-22 Pi4700e
Ne
twor
k
Se
ttin
g
s
Ch
apte
r 3
3 Click Next on the introduction page of the wizard.
4 On the Local or Network Printer page, select the Network printer
option, and then click Next .
5 On the Locate Your Printer page, select the Connect to a printer on
the Internet or your intranet option.
6 Type the IPP printer’s URL into the URL field as shown below, and
then click Next .
http://<IP address of the printer>:631/nic/Print
(Example) When the IP address of the Digital Copier is 192.9.200.200:
http://192.9.200.200:631/nic/Print
7 Click OK on the confirmation dialog box that appears.
8 In the Manufacturers and Printers lists, select the printer you want to
use, and then click OK .
If the name of the printer you want to use does not appear in the lists,
load the Printer Drivers CD-ROM that comes with your Digital Copier
into your computer’s CD-ROM drive and then click the Have Disk but-
ton. Next, specify the location of the printer’s INF file on the CD-ROM.
9 Select whether you use this printer as the default printer or not, and
then click
Next .
10 Click Finish to exit the wizard.
11 Click the icon of the newly added printer to select it, and then click
Properties on the File menu.
12 Display the General tab and then print a test page.
13 If the test prints normally, complete the procedure by clicking OK to
close the Properties dialog box.
After you finish installing a printer with the above procedure, you can use
it just as you would any standard local printer. The printer can also be
used as a network printer by other Windows computers on your network
whose Windows 2000/XP systems are configured the same way as de-
scribed above.