Motorola XTNi Series - Manual (Page 41)

39 English
PROG
RAMM
ING
FEATUR
ES
Programming Mode.
• If you're in ’Idle’ Programming Mode and
wish to exit the ’Programming Mode’, long
press the PTT button (to be back to normal
radio operation).
• Whenever you wrap around to the
beginning of the Programming Mode
options, your radio's changes will be
automatically saved, even if you turn OFF
the radio.
• You can exit any Programming Mode
without saving changes (as long as you
haven't wrapped around yet to the
beginning) by turning the radio OFF.
PROGRAMMING RX (RECEPTION)
FREQUENCIES
Once you have chosen the channel you want
to program, short press the PTT button or
MENU to scroll through the options until you
reach ‘Frequency Programming Mode’. The
radio display will show the frequency code as
follows:
To program the desired frequency, scroll up/
down with the
/ buttons until you
find the frequency code you need. Long press
the PTT button to exit and save, or short press
the PTT button to move to the next
programming feature without saving.
PROGRAMMING RX (RECEPTION) CODES
(CTCSS/DPL)
Once you have chosen the channel you want
to program, short press the PTT button or
R
X