Motorola XTNi Series User Manual

Page 57

Advertising
background image

55

English

T

R

OU
BLESHOOTING

Message not transmitted/
received

Confirm radios have the same Channel, Frequency, Interference
Eliminator Code and Scramble Code settings. Recharge, replace
and/or reposition batteries. Refer to ""About the Li-Ion Battery" on
page 12. Obstru
ctions and operating indoors, or in vehicles, may
interfere: change location. Refer to "Talking and Monitoring" on
page 27. V
erify that the radio is not in Scan mode. Refer to
"Programming Scan List" on page 44 and "Nuisance Channel
Delete" on page 47
.

Heavy static or interference

Radios are too close, they must be at least five feet apart. Radios
are too far apart or obstacles are interfering with transmission.
Refer to "Talking and Monitoring" on page 27.

Low batteries

Recharge or replace Li-Ion battery. Replace AA batteries. Extreme
operating temperatures affect battery life. Refer to "About the Li-Ion
Battery" on page 12.

Drop-in Charger LED light
does not come on

Check radio/battery is properly inserted and check battery/charger
contacts to be sure they are clean and charging pin is inserted
correctly. Refer to "Charging the Battery" on page 19, "Drop-in Tray
Charger LED Indicators" on page 23 a
nd "Installing the Lithium-Ion
(Li-Ion) Battery" on page 14
.

Low battery LED blinking
although new batteries are
installed

Verify that the radio is set to the correct battery type. Refer to
"Installing the Lithium-Ion (Li-Ion) Battery" on page 14, "Installing
Alkaline Battery" on page 15
and "About the Li-Ion Battery" on page
12.

Symptom

Try this

Advertising