Motorola XTNi Series - Manual (Page 46)

44 English
PR
OGRAMMING FEATURES
PROGRAMMING MICROPHONE
ACCESSORY GAIN LEVEL
To configure the Accessory Microphone Gain
Level, enter ’Programming Mode’ and scroll
through the programming options by short
pressing the PTT button.
The current accessory microphone gain level
setting will be blinking. You can select the
desired gain level (1=Low gain,2= Medium
gain or 3= High gain) by pressing the
/
buttons. Once you have selected the
gain level you want to program, long press the
PTT button to exit and save or short press the
PTT button to move to the next programming
feature without saving.
Note: The values available for accessory
microphone gain level are dependent upon
maximum levels the radio supports.
PROGRAMMING SCAN LIST
You can enable/disable the Channel Scanning
feature for
each one of the channels in your
radio. To do so, enter ’Programming Mode’ and
select the channel you want to program. Scroll
through the programming options by short
pressing the PTT button until you reach the
‘Scan Programming Mode’. The radio display
will show the scan icon
as follows:
Both the channel number and current scan
setting (YES=ON or NO=OFF) will be blinking
MIC
YES