3 positioning documents on the original glass, To position sheet documents – Minolta DI2510 User Manual
Page 100
6.3 Positioning Documents on the Original Glass
6
Di2010/Di2510/Di3010/Di3510
6-7
O
ri
g
in
al Doc
u
me
nts
Ch
apt
er
6
6.3
Positioning Documents on the Original Glass
The procedure for positioning the document differs depending on the type of docu-
ment being copied, therefore be sure the document is positioned correctly. For in-
formation on using the duplexing document feeder, refer to “Feeding the Document
Through the Duplexing Document Feeder” (page 6-4).
When placing the document directly on the original glass, position it after lifting the
original cover or the duplexing document feeder 15° or more, as shown below.
To position sheet documents
Follow the procedure described below when copying plain paper or documents that
cannot be fed through the duplexing document feeder.
1
Lift open the original cover, or the
duplexing document feeder if it is
installed, and then position the
document face down on the
original glass.
When loaded horizontally
When loaded vertically
15
15