Minolta DI2510 - Manual (Page 103)

6 6.4 Loading Documents for Specific Applications
6-10 Di2010/Di2510/Di3010/Di3510
O
ri
g
in
al Doc
u
me
nts
Ch
apt
er
6
6.4 Loading Documents for Specific Applications
The most appropriate document feed method and copy settings for specific appli-
cations are described below.
For details on specifying the various copy settings, refer to “7 Specifying Copy Set-
tings”.
Description of the Table
1. Shows whether the original document and the desired copy are single-sided or
double-sided.
2. Shows how the copy will appear.
3. Shows how the document should be positioned. (page 6-4)
4. Shows the selected Copy setting. (Single-Sided, Double-Sided, 2in1 or 4in1) on
the Orig. Ö Copy screen (page 7-18)
5. Shows the selected Finishing setting. (Corner Staple, 2-Point Staple or Hole
Punch) (page 7-2)
6. Shows the selected Margin setting from the Orig. Ö Copy screen if a margin is
specified for the document. (page 7-24)
7. Shows the selected File Margin setting from the Auxiliary screen if a binding
margin is specified for the copy. (Advanced Operations volume)
8. Shows the stapling or hole-punching position that must be selected. (page 7-7
and page 7-9)
* A dash (—) indicates that no setting should be selected.
Single-Sided Document Ö
Single-Sided Copy
Desired Copy Copy
Setting Finishing
Setting Margin
Setting
(Orig. Ö
Copy
Screen) File
Margin
Setting
(Auxiliary
Screen) Binding
Position
Single-
Sided Corner Staple — — —
1 2 3 4 5 6 7 8
1
2
3