Minolta DI2510 - Manual (Page 102)

6.3 Positioning Documents on the Original Glass 6
Di2010/Di2510/Di3010/Di3510 6-9
O
ri
g
in
al Doc
u
me
nts
Ch
apt
er
6
To position books or magazines
Follow the procedure described below when copying bound documents, such as
books and magazines.
1 In the Basics screen, touch [Orig. Ö Copy], and touch [Back]. Then, make other
settings.
2 Lift open the original cover, or the
duplexing document feeder if it is
installed.
3 Position the document face down
on the original glass, with the top
of the book toward the rear of the
copier and with the center of the
book aligned with the book mark in
the document scale.
4 Carefully close the original cover, or the duplexing document feeder if it is
installed.
✎
Note
For thick documents, make the copy without closing the original cover or du-
plexing document feeder.
While the document is being scanned with the original cover or duplexing
document feeder open, do not look directly at the bright light that may shine
through the original glass.
If the document is not positioned correctly, the copies will not be printed in
the correct sequence.
Lift open the original cover, or the duplexing document feeder if it is installed,
15° or more.
Do not place objects exceeding 6-1/2 lbs. on the original glass.
If a book is placed on the original glass, do not press it down with extreme
force, otherwise the original glass may be damaged.
✎
Tip
For details, refer to “Copying a Book” on page 7-27.