Minolta DI2510 - Manual (Page 13)

1 1.4 Components and Their Functions
1-6 Di2010/Di2510/Di3010/Di3510
Int
ro
duc
tio
n
Chap
ter
1
1.4 Components and Their Functions
No. Part Name Description
1 Duplexing Document Feeder
AFR-19 (optional) Automatically feeds one document sheet at a time for scanning,
and automatically turns over double-sided documents for
scanning.
Referred to as the “duplexing document feeder” throughout the
manual.
2 Original Cover Kit OC-6
(optional) Presses down on the loaded document to keep it in place
Referred to as the “original cover” throughout the manual.
3 Copy Desk CD-4M
(optional) The copier can be placed on the copy desk.
Using the copy desk allows the copier to be set up on the floor.
Referred to as the “copy desk” throughout the manual.
4 Large Capacity Cabinet
PF-122 (optional) A large-capacity paper supply cassette that can supply 2,500
sheets of paper.
• Can only be used with the Di2510/Di3010/Di3510.
Referred to as the “large capacity cabinet” throughout the
manual.
5 2 Way Paper Feed Cabinet
PF-210 (optional) A two-level paper supply tray. Each paper supply tray can hold
up to 500 sheets of paper.
Referred to as the “paper feed cabinet” throughout the manual.
6 Job Separator JS-203
(optional) Allows printed pages to be separated.
Pull the lever when taking out the paper.
• In order to use the job separator, the switchback unit must be
installed.
7 Duplex Unit AD-16
(Option for the Di2010 only) Automatically turns the pages over, and prints on both sides.
Referred to as the “duplex unit” throughout the manual. When
using the duplex unit, the switchback unit is required.
8 Switchback Unit SB-1
(Option for the Di2010 only) When copying to both sides of a page, this turns over the paper.
Required when using the duplex unit.
2 1
3 4
6
5
8
7